Description
Two REVOsdr Bridge 2.4G modules, paired and communicating together, form a wireless bridge that enables stable, reliable and fast connectivity for the transmission of I/O Command and Control (CC) data, in point-to-point communication. Each module is small, light and portable, intended to be mounted on an existing machine, equipment or system, for example on a robot arm, a Programmable Logic Controller (PLC), an Automatic Guided Vehicle (AGV) or a Human Machine Interface (HMI), in an industrial environment, indoor/outdoor, with moisture or moisture-free, to replace the respective wired Ethernet communication cable between two points. Each module is to be powered through its individual external battery.
REVOsdr Bridge 2.4G should not be used in safety-, emergency- or life-critical applications. Such applications do not make part of its intended use.
Mechanical Specifications
Housing
Aluminium housing with 4 pre-drilled mounting holes on base plate, protection class IP30. Passive ventilation, through holes in the encapsulation.
Dimensions (L x W x H)
156 mm x 64 mm x 28 mm
Weight
200 g
Electrical Specifications
Power Supply (External Dry Cell Battery or Power Bank)
Voltage: 5 VDC ±10 %
Maximum current consumption: 2.5 A (typically 2.5 A)
Power Consumption
Maximum power: 12.5 W
Radio Specifications
Operating Frequency Range
2 400 – 2 483.5 MHz
Nominal Channel Bandwidth(s)
0.782 MHz to 16.23 MHz, dynamic
Maximum RF Conducted Output Power
7.3 dBm
Type of Equipment
Stand-alone, proprietary protocol
